Blank moulds
ACMOS 43-22
- Is a varnish-like coating resistant to high temperatures, which was developed in particular for coating moulds for the blow and blow processprocesie blow-and-blow
- Forms a dull grey, firmly adhering film, which permits dry starting of the moulds
- Lubrication unnecessary for up to 5 hours
ACMOS 43-2425
- Is a varnish-like (in spray), highly heat-resistant coating which has been specially developed for the surface treatment of moulds
- If an ACMOS mould release agent is used, brushing of the blank moulds is necessary only at longer intervals
ACMOS 43-2432
- Is very simple to apply and presents no problems
- Is a varnish-like, highly heat-resistant coating which has been specially developed for surface treatment
ACMOS 43-2436
- Is a paint-type, white, highly heat-resistant coating with an excellent mould life even under extreme conditions
- Is a multi-functional separating agent for particular applications (frames, stamps, moulds)
ACMOS 43-32
- Is a multi-functional separating agent for particular applications (frames, stamps, moulds)
- Very good results are obtained in circumstances where other coatings no longer function
- Contains no dichloromethane
ACMOS 43-36
- Is a multi-functional separating agent for particular applications (frames, stamps, moulds)
- Is a paint-type, white, highly heat-resistant coating with an excellent mould life even under extreme conditions
ACMOS 43-5001
- Is an aqueous, high temperature-resistant coating compound for the surface treatment of blank moulds
- Forms a matt grey film with a high adhesive strength, which allows the moulds to be brought together in dry conditions
- Depending on the gob speed and the article being manufactured, the service life is between 15 and 30 hours
ACMOS 43-51
- Is a varnish-type, highly heat-resistant coating specially developed for surface treatment of glass moulds
- Forms a matt black, very strongly adhering film, which enables dry closing of the moulds
- The solvent combination inside ACMOS 43-51 is non-flammable
ACMOS 43-9025
- Developed for surface treatment of moulds for the blow-and-blow process
- Highly heat-resistant coating
- Renders mould lubrication unnecessary for up to 5 hours
ACMOS 48-221
- Is a mould release paste with an excellent lubricating effect
- Is a product based on graphite and mineral oil, which has very good wetting properties
- Cracks in the glass are avoided, likewise wobbling and tilting glasses
ACMOS 48-403
- Is a mould release paste on a graphite-mineral oil base
- Prevents the orange effect on the glass surface
- Forms a very thin yet uniform separating film that adheres well and does not split off
ACMOS 48-405
- The heat transfer to the mould is not obstructed and best conditions are provided for good glass dispersion
- Is very economical in use and very efficient
ACMOS 48-407
- Outstanding flow and wetting properties on the hot blank mould
- Developed especially for the press-and-blow and blow-and-blow processes
- Forms a smooth graphite film, thereby producing a high-gloss surface on the glass