ACMOS 46-41-3
ACMOS 46-41-3 is a cooling lubricant, which is suitable for use both in circulation systems and in systems without return of the outflowing cooling lubricant emulsion ACMOS 46-41-3 contains no mineral oil or nitrite.
PROPERTIES:
ACMOS 46-41-3 is readily miscible with water to form a clear to weakly turbid emulsion. Appearance of the concentrate : brownish, clear Density (20°C) : approx. 1.02 g/ml Viscosity (25°C) : approx. 60 mPas pH value : 9.3 (1%)
SUPPLY FORM:
Non-returnable drums with net contents of 20 kg and 200 kg.
ACMOS 46-41-3 can be used in a dilution between 1 : 125 and 1 : 250, a ratio of 1 : 200 being the most advantageous according to experience so far acquired. The cooling lubricant emulsion should ideally be prepared with a metering plunger pump (e.g. Bran + Lübbe, Lewa or Pro Minent), because a constant dilution is achieved only in this way. The hardness of the water should be between 5° and 15° dH.
TECHNICAL DATA:
ACMOS 46-41-3 is readily miscible with water to form a clear to weakly turbid emulsion. Appearance of the concentrate : brownish, clear Density (20°C) : approx. 1.02 g/ml Viscosity (25°C) : approx. 60 mPas pH value : 9.3 (1%)
SUPPLY FORM:
Non-returnable drums with net contents of 20 kg and 200 kg.
It was possible to combine all properties which must be present in a modern, easily cleaned cooling lubricant, by careful selection of the individual components: – excellent lubricating effect – long feeder blade life – no attack on aluminium – no gumming or resinification – high resistance to microorganisms – excellent cooling effect – very good corrosion protection – very good resistance to hard water – highly economical consumption
APPLICATION:
ACMOS 46-41-3 can be used in a dilution between 1 : 125 and 1 : 250, a ratio of 1 : 200 being the most advantageous according to experience so far acquired. The cooling lubricant emulsion should ideally be prepared with a metering plunger pump (e.g. Bran + Lübbe, Lewa or Pro Minent), because a constant dilution is achieved only in this way. The hardness of the water should be between 5° and 15° dH.
TECHNICAL DATA:
ACMOS 46-41-3 is readily miscible with water to form a clear to weakly turbid emulsion. Appearance of the concentrate : brownish, clear Density (20°C) : approx. 1.02 g/ml Viscosity (25°C) : approx. 60 mPas pH value : 9.3 (1%)
SUPPLY FORM:
Non-returnable drums with net contents of 20 kg and 200 kg.