ACMOS 43-2432 is a varnish-like, highly heat-resistant coating which has been specially developed for surface treatment.
When ACMOS 43-2432 is employed, no lubrication whatever is needed in the difficult phase after the moulds are commissioned. Subsequent applications are less frequent than hitherto.
ACMOS 43-2432 is a multi-functional separating agent for particular applications (frames, stamps, moulds). Because of the exceptionally high abrasion resistance of the coating, very good results are obtained in circumstances where other coatings no longer function.
ACMOS 43-2432 is very simple to apply and presents no problems. Before being sprayed, the under-surfaces must be cleaned to the bare metal and ideally degreased with ACMOSOL 130-28 cleaner.
The can must always be shaken well before each application.
ACMOS 43-2432 should be applied in a thin, even coating from a distance of about 20 cm. For optimum effects, two coatings should be applied in succession.
Unevenly applied coatings can easily be removed with ACMOSOL 130-28 cleaner.
Before the coated parts are inserted in the machine the coating must be tempered for about 60 minutes at an oven temperature of 350°C. The coating must not come in contact with a naked gas flame during this treatment.
ACMOS 43-2432 is supplied in spray cans. Cartons contain 12 cans.
ACMOSOL 130-28 is supplied in 18 kg canisters.